general data life expectancy minimum operations mechanical 1 x 10 6 electrical 1 x 10 5 at 20 a 13.5 vdc resistive operate time 5 ms typical at nominal coil voltage release time 3 ms typical at nominal coil voltage dielectric strength 500 vac coil to contact (at sea level for 1 min.) 500 vac between open contacts insulation resistance 100 megohms min. at 500 vdc 85% rh (at 40c) dropout greater than 10% of nominal coil voltage ambient temperature at nominal coil voltage operating -40c (-40f) to 125c (257f) storage -40c (-40f) to 125c (257f) vibration 10-40 hz double amplitude 1.27mm shock 20 g enclosure p.b.t. polyester terminals 2.8mm qc max. solder temp 270c (518f) max. solder time 5 seconds max. solvent temp 80c (176f) max. immersion time 30 seconds weight 11 grams AZ992 1/3/13 20 amp automotive relay features ? designed for headlight control, fuel pump control, a/c compressor clutch, and more vibration and shock resistant epoxy sealed version available 2.8mm qc terminals contacts arrangement spst (1 form a) ratings resistive load: max. switched power: 280w max. switched current: 20a max. switched voltage: 50vdc rated load: 20a/20a (make/break) at 13.5vdc resistive 40a/20a (make/break at 13.5vdc inductive 100a/20a(make/break) at 13.5vdc lamp material silver tin oxide (agsno 2 ) resistance < 100 milliohms initially (6 v, 1 a voltage drop method) coil power at pickup voltage (typical) 334 mw max temperature 125c (257f) notes 1. all values at 20c (68f). 2. relay may pull in with less than ?must operate? value. 3. specifications subject to change without notice.
AZ992 1/3/13 mechanical data dimensions in inches with metric equivalents in parentheses. tolerance: .010" - 1 form a relay ordering data standard relays coil specifications order number nominal coil must operate max. continuous coil resistance 1 form a (spst) vdc vdc vdc 10% 12 7.2 16.0 155 AZ992?1a?12d * add suffix ?e? for epoxy sealed version. add suffix ?r? for 1000 ohm resistor in parallel.
|
